Water droplets on the glass door of the freezer?

Today, commercial freezers with glass doors have become standard equipment in supermarkets, convenience stores, KTVs and other places. Commercial freezers that have been used for a long time will show that the glass door is not closed tightly. We are concerned about the lack of airtightness of commercial refrigerators and the waste of a lot of electricity, which will cause the compressor to work under load and affect its performance and stability when it is not detected for a long time.

The main treatment options for commercial refrigerator glass doors are as follows:
1. Very easy to handle when obstacles prevent the closing of the commercial refrigerator glass door. Only manual removal of obstacles can solve the problem of lax closure.
2. The loss of symmetry in the commercial freezer glass door is caused by a problem with the two hinges that hold the glass door.

It is necessary to contact the manufacturer to replace the hinge in time.
3. Generally, supermarket refrigerators that have been used for a long time will be deformed, which means that commercial refrigerators have reached the limit of their use and need to be replaced and re-purchased.
4. When the sealing bolt is damaged, it may cause the sealing bolt not to be tightly closed.

The sealing bolts on the inside of the glass door should be replaced in time.
When it is found that the glass door is not closed tightly, it is necessary to troubleshoot in time to find out the real cause of the loose glass door of the commercial refrigerator. Common reasons are as follows:
1. The obstruction prevents the normal closing of the glass door of the commercial refrigerator;
2. The glass door of the commercial freezer loses its symmetrical angle, causing the door to tilt and cannot be closed tightly;
3. The commercial refrigerator is deformed, and the sealing bolt cannot find the supporting surface;
4. The sealing bolt is damaged and cannot be used;