Very close to the glass door of the freezer is not closed tightly, what is the waste of electricity?

When using commercial refrigerators, we often encounter various problems. Understand the following content, you can easily deal with the small problems of the freezer!

1. Why does the glass door of the refrigerator condense?

Answer: The glass door of the refrigerator has the advantage of strong display power. We use heat-reflective glass with enhanced heat insulation performance, but the outer surface temperature of the heat-reflective glass is lower than the ambient temperature, so condensation, yes, water droplets, will appear on the outer surface of the glass.

In addition, if the glass door is not tightly sealed, it will cause the cold air in the cabinet to leak and condense on the glass surface, which is a common phenomenon with glass doors. The temperature in the freezer is low. Yes, the higher the ambient air humidity, the more obvious the phenomenon, please wipe it with a rag.

2. What is the "leakage" of the freezer?

Answer: The freezer is prone to static electricity during use, which requires the user to use a three-pin power socket. Some three-pin sockets do not have a ground wire at all, especially many of them do not have a ground wire, so the static electricity generated cannot be discharged in time, resulting in "leakage". Also, if the leak is caused by damaged electrical components of the refrigerator and a damaged power cord, it can only be fixed with a repair.

3. Q: What is the reason for the loud noise of the thermostat?

Answer: After the freezer has been running for a certain period of time, when the temperature in the freezer reaches the temperature set by the thermostat, the temperature sensing probe of the thermostat will make the thermostat act, and at the same time make a clear "click" sound to close and start, this is normal phenomenon.

4. What should be paid attention to in the daily maintenance of the freezer?

Answer: The freezer should be placed in a cool and ventilated place. Do not stack items in front of or behind the refrigerator.

It should be stable. Two hours after the refrigerator is turned on, when the temperature in the cabinet drops to a lower temperature, put the items to be frozen. If there are too many items, drop them a few times.

Large items should be broken down into smaller pieces as much as possible. When stacking, leave space between items to allow air conditioning to flow. When you want to fill the freezer with liquid substances such as soda water and beverages, due to the large heat capacity of these substances, the temperature in the freezer will rise, which will affect the cooling effect of other substances in the freezer, and it is easy to keep the refrigerator for a long time Time runs because if these substances have to be frozen into ice to get them off, the temperature in the freezer can only drop below -18C