There are several types of glass for the glass door of the refrigerator, please look down

For the glass door of the refrigerator, how to arrange the production of products that meet the requirements of insulating glass? Since the two types of insulating glass have many similarities in the process of processing, now briefly analyze their common process.
1. Glass cutting and blanking: the original glass is generally colorless float glass or other colored glass, instant glass, copper glass, Jiachang glass, and the degree is generally above 12mm. The glass must meet the new national standard GB 1614, which is very good The products can only be used after passing the inspection. Do not use hand or machine, but make sure to fit to size.

Workers in this process should pay attention to this during operation. The surface of the glass should have no scratches, the internal material is uniform, and there are no obvious defects such as air bubbles and slag inclusions.

2. Glass cleaning and drying: Glass cleaning - it is necessary to use machine cleaning, because manual cleaning cannot guarantee the cleaning quality. Before cleaning, it is necessary to check whether the glass is scratched.

To ensure the adhesion between the sealant and the glass, deionized water was used. In addition, in order to ensure the circulation of water, the water can be filtered to ensure long-term use. After cleaning, the glass should be inspected by light, and check whether there are water droplets, water collapse and other dirt on the surface of the glass. If there are water droplets, water collapse and other dirt, if the pollution disappears, the machine's operating speed, heating temperature, air volume and brush should be adjusted chamber until it works well.

Glass storage carts separate glass shards from each other. The spherical glass should be assembled into hollow glass within 1:00, and ensure that there is no scratch between the glass and the pig.
No matter in production, transportation or construction site, the correct placement of insulating glass will affect the quality of insulating glass.

The planning requirements of the first stacked probe frame should consider the subtle points of the hollow spherical glass, and the stacked frame should have a certain inclination. However, the bottom and sides should always be kept at 90 degrees to ensure that the two glass bottom edges of the insulating glass can be placed vertically on the stacker. In addition, it should be noted that the bottom of the glass should not be stained with oil, lime and other additives, because they are the second and second sealants of the insulating glass, and they will have different corrosion effects, which will affect the sealing of the insulating glass. Function.


In order to carry the sound insulation and heat insulation effect of the high-rise hollow glass wall, the manufacturer exhausts the air in the hollow glass and fills it with emotion. This process further improves the performance of the hollow glass.