The glass door manufacturer tells you that the freezer does not dissipate heat and should be dealt with as soon as possible

The glass door manufacturer tells you how to use the freezer to save electricity: People cannot live without electrical appliances. There are all kinds of electrical appliances at home. Of course, power consumption is also increasing. Summarize the tips for saving electricity in daily life and find out Refrigerator compressors are key to saving energy.

1. Timed defrosting. When the frost thickness in the freezing chamber is greater than 5mm, the refrigeration effect will be worse, and the relative working time of the compressor will be prolonged, so the power consumption will increase relatively.

2. When the weather gets warmer and the room temperature is higher than 15°C, turn the power-saving defrost switch of the display freezer to the off position, which can also reduce power consumption.

3. There should be a certain gap between the food in the freezer and between the food and the inner wall of the freezer, so that the air in the freezer can circulate, improve the cooling effect, and reduce the starting time and time of the freezer. compressor.

4. The refrigerator should be placed in a place with low indoor temperature and good ventilation to facilitate the cooling of the refrigerator and reduce the start-up time and start-up time of the refrigerator compressor.

5. The food must be cooled to room temperature before putting it into the freezer, and the number of times the door of the vertical freezer is opened should be reduced as much as possible to shorten the opening time.

6. Correctly adjust the temperature controller of the refrigerator to reduce power consumption.

The temperature control knob of the freezer is marked with numbers, which represent the control scale of the freezer temperature. The smaller the value, the higher the control temperature. The indication scale of the thermostat in different seasons is: 3-4 in summer; 2-3 in spring and autumn; 4-5 in winter.

When the room temperature is lower than 10°C, the temperature controller should turn to "6".

7. Remind you to remove the dust on the condenser regularly. If the condenser has accumulated dust for a long time, it will affect the cooling of the refrigerator, and it will not be able to evaporate effectively and affect the cooling effect.

If the refrigerator is to reach the predetermined temperature, it is necessary to extend the working time of the compressor and increase the power consumption. Therefore, the condenser should be cleaned every two years.

The above are the energy-saving methods for refrigerators that we have introduced to you. We hope that our introduction can provide you with help.