The editor shares the advantages of glass doors for refrigerators that are worthy of customers' choice

Why is the glass door of the freezer not cooling? What should I do? Next, glass will answer for you

First, the common reasons why the glass door of the refrigerator does not cool:

1. The capillary of the freezer is blocked, so that the refrigerant cannot enter the evaporator, and then cannot absorb the heat emitted by the freezer, and the temperature in the freezer will not drop;

2. Maybe the screw fixing the high-pressure output buffer pipe in the compressor is no longer strong, or the buffer pipe is broken, so the low-pressure pipe cannot be sucked and the high-pressure pipe can not be tired. The freezer glass door won't cool despite the compressor running.

3. There are problems such as leakage in the refrigeration system, and the glass door of the refrigerator that does not absorb the heat of the refrigerant will naturally not be refrigerated;

4. The outlet valve and expansion valve of the glass door of the freezer are improperly adjusted, and the parts of the valve plate are not well sealed, resulting in leakage of the air conditioner or wear of the compressor piston.

5. The leakage of the refrigeration system may be caused by poor welding of the refrigerator or problems with the use of the refrigerator, resulting in slow cooling

6. The cooling device of the freezer glass door box may be too low, which may affect the temperature of the freezer glass door.

2. What should I do if the glass door of the freezer is not refrigerated?

Second, in view of the above problems, the method to deal with the non-refrigeration of the glass door of the refrigerator is as follows:

① If the capillary is blocked, the capillary must be removed for cleaning;

②If there is a problem with the buffer tube, you can only open the shell, fix the screws or replace the buffer tube;

③ If there is a problem with the refrigeration system, first find out the leakage location of the refrigeration system, perform welding, repair, pressure test and evacuate the location. When all the conditions are qualified, add a certain amount of refrigerant until it reaches a certain temperature in the glass door of the refrigerator and stop.

If you can't solder, please find a professional master to do it. Don't hold your head down.

④ If there is a problem with the expansion valve and the outlet valve, please cut off the power supply of the freezer first, then turn the inlet valve to the end counterclockwise, unscrew the screw, install the "wire alignment", then install the pressure gauge and the connector to close the pressure Gauge valve, turn the intake valve clockwise to the three-way, observe whether the internal pressure of the freezer is normal, and adjust the gear according to the season and temperature.