Shhag is the best freezer glass doors supplier and display glass door manufacturer.
Language
Shhag is the best freezer glass doors supplier and display glass door manufacturer.
"With the gradual improvement of people's living standards, commercial electrical appliances have become an indispensable necessity in supermarkets. However, while refrigerators bring us convenience, they also bring a certain degree of risk to our lives. If you don't understand Electricity safety knowledge, if you do not know how to control it, it is likely to be involved in danger.
1. The thermostat of the glass door of the freezer leaks
The leakage phenomenon of the freezer glass door thermostat is mainly manifested as: when our hands touch the cabinet, there will be numbness, but the compressor works normally and the temperature in the cabinet is normal.
Since most thermostats are mounted on the inside wall of the freezer glass door, temperature changes inside the freezer glass door can cause condensation around the thermostat. When condensate flows into the thermostat, the resistance between the electrical contacts of the freezer glass door thermostat and the cabinet decreases, causing an open circuit.
For this phenomenon, we can eliminate this problem by defrosting regularly, wiping off the water in the refrigerator frequently, and preventing condensation from flowing into the thermostat. But at the same time, we must also pay attention to frequent cleaning of the bakelite structure of the refrigerator thermostat and some dirt around it, because the dust will also cause leakage after absorbing water.
Therefore, we still need to maintain the glass door of the freezer from time to time, so that not only can this kind of leakage be avoided, but also the service life of the freezer can be effectively extended.
2. The moisture-proof line of the refrigerator leaks
The leakage of the moisture-proof line of the glass door of the freezer is mainly manifested in the frequent switching of the overload protection relay. After the power is turned on, the overload protection relay is often turned on, which leads to the non-conduction of the glass door compressor of the freezer and the inductance of the glass door of the freezer.
At this point, we can use some insulating sleeving to cover the moisture proof wires. Remove the old wires and replace them with new rubber insulated wires.
When encountering such problems, close the glass door of the freezer for maintenance to prevent accidents, especially in supermarkets, convenience stores and other places, where the passenger flow is relatively large. Once an accident occurs, the loss is not only money, but also personal safety.
