Remember not to put too many things when using the glass door of the freezer in the supermarket

Display cabinet glass door manufacturers share: How can the glass door of the freezer save electricity

In today's life, refrigerators have become indispensable electrical equipment, so how to save electricity when using refrigerators? Let us introduce you next.

1. The freezer should be placed in a room where the temperature is low, which is conducive to the cooling of the freezer and can reduce the number and start-up time of the refrigerator compressor.
2. Before putting the food in the refrigerator, it is necessary to cool it down to room temperature.

At the same time, try to reduce the turn-on time of the upright freezer and shorten the turn-on time.
3. There should be a certain space between the food in the refrigerator and between the food and the inner wall of the refrigerator, so that the air in the refrigerator can circulate, improve the cooling effect, and reduce the start-up time and compressor time.
4. Defrost regularly.

When the frost thickness in the freezing chamber exceeds 5mm, the cooling effect will be worse, and the relative working time of the compressor will be extended, so the power consumption will increase relatively.
5. When the weather gets warmer and the room temperature reaches above 15°C, turn the power-saving defrosting switch of the display freezer to the off position to reduce power consumption.
6. Correctly adjust the temperature controller of the refrigerator to reduce power consumption.

The temperature control knobs of the refrigerator are marked with numbers, which represent the temperature control range of the refrigerator. The smaller the value, the higher the control temperature. The indication range of the thermostat in different seasons is: 3-4 in summer; 2-3 in spring and autumn; 4-5 in winter.

When the room temperature is lower than 10°C, the temperature controller should be turned to the "6" position.
7. Regularly clean the dust on the condenser. If there is dust in the condenser for a long time, it will affect the heat dissipation of the refrigerator, and it will not be able to evaporate effectively and affect the cooling effect.

In order to reach the predetermined temperature of the refrigerator, it is necessary to extend the working time of the compressor and increase the power consumption. Therefore, the condenser should be cleaned every two years.