Is the glass door of the freezer not closing tightly? It may be the following three reasons

Freezer glass door maintenance method introduction:

1. The display cabinet should be placed on the flat ground, although the use environment is better. Do not lie flat. The indoor environment should be well ventilated and dry.

The distance between the top of the refrigerator and the ceiling should be greater than 50 cm, the distance between the left and right sides and other objects should be greater than 20 cm, and the distance between the front and other objects should be greater than 20 cm.

2. Newly purchased or transported cabinets should be left to stand for 2 to 6 hours before starting. Before use, the cabinet should be powered on for 2 to 6 hours, and it should not be started immediately after shutdown.

Should wait for more than 5 minutes, so as not to burn the compressor. Generally speaking, the gear position of the freezer thermostat should be adjusted according to the season, ambient temperature and usage.

3. In summer, the temperature controller should be placed at 5 or 6; in spring and autumn, the temperature controller should be placed at 3 or 4.

When using a freezer, the number of door openings should be reduced as much as possible to shorten the food storage time. Hot foods should be cooled to room temperature before being placed in the refrigerator. For indirect air-cooled refrigerators, when storing food, the food should not be too close to the air outlet.

4. For the direct cooling type freezer, when the frosting thickness reaches 5 mm, manual defrosting is required. Routine maintenance: Clean the compressor and condenser regularly. Clean your refrigerator regularly at least every two months.

When cleaning the refrigerator, first cut off the power supply, gently scrub with neutral detergent and water, and then wipe with clean water.

5. Do not use washing powder, detergent, talcum powder, alkaline detergent, Tiannan water, boiling water, oil, brushes, etc. to clean the equipment cabinet. When the freezer is not in use for a long time, unplug the power plug, wipe the inside of the freezer clean, and close the door after the cabinet is completely dry.