How to reduce the noise of the glass door of the refrigerator

The noise level of commercial refrigerator glass doors is much higher than that of household appliances, which can make people feel disgusted. How to reduce the noise of the glass door of the refrigerator, the following are common noise reduction methods for the glass door of the refrigerator.
The noise of the glass door of the refrigerator mainly comes from the central parts of the compressor refrigeration system.

Inferior refrigerator glass doors generally use refurbished parts, and the noise generated in actual use will be very loud. Therefore, special attention should be paid to the purchase of glass doors for refrigerators. Cheap is not necessarily a good product.

The noise is loud when the compressor is just started, and this is also the time when the compressor has a heavy workload.

When using the glass door of the refrigerator, the number of starts and stops of the compressor should be reduced as much as possible, and the glass door of the refrigerator should be in a hot start state as much as possible, which can not only save energy, but also prolong the service life of the refrigerator.
Do not use it casually under special circumstances. The sound insulation tool will prevent the heat dissipation of the compressor and have certain side effects on the glass door of the refrigerator.

Common causes of freezer leaks and their solutions.
The water tray is overflowing because of its relatively private location.

It is difficult for the consumer to detect that the amount of water in the water tray exceeds the limit and will overflow from the water tray. If the consumer does not pay attention to changing the water tray, water will leak. The solution is to regularly clean the water in the water tray and develop a good habit of regular cleaning.


If there is water in the cabinet, it should be cleaned up in time, and check whether the water outlet is blocked. The occurrence of large areas of water is generally caused by faults, reflected in the blockage of the evaporator causing ice to atomize into water, when large amounts of water will form. The solution is to contact professional repair personnel for repair processing, and consumers do not understand the situation of manual processing.


Blocked drains, blocked drains are the main cause of water formation, if the water in the freezer glass door tray and evaporator is not removed in time, water will form. The solution is to contact the freezer glass door manufacturer to check the problem and correct it in time.