How to have the high quality of the freezer glass door and fresh-keeping function at the same time?

Freezer glass door maintenance method introduction

1. Although the use environment is good, the display cabinet should be placed on a flat ground. Don't lie on your back. The indoor environment where the refrigerator is placed should be well ventilated and dry. The distance between the top of the refrigerator and the ceiling should be more than 50cm, and the distance between the left and right sides of the refrigerator and other objects should be more than 20cm.

The refrigerator is more than 20cm away from other objects.

2. Newly purchased or processed cabinets should be placed for 2 to 6 hours before starting. Before use, after turning on the power and turning off the power, the advanced space-time cabinet cannot be started immediately for 2 to 6 hours.

It is necessary to wait for more than 5 minutes to avoid burning the compressor. Generally, the position of the refrigerator temperature controller should be adjusted according to the season, ambient temperature and operating conditions.

3. It is recommended to place the temperature controller at position 5 or 6 in summer; it is more appropriate to place the temperature controller at position 3 or 4 in spring and autumn.

When using a refrigerator, the number of door openings should be reduced as much as possible, and the storage and storage time of food should be shortened. Hot food should be cooled to room temperature before being placed in the refrigerator. For air-cooled refrigerators, when storing food, the food should not be too close to the air outlet.

4. For direct cooling freezers, when the frost thickness reaches 5mm, manual defrosting is required. Routine maintenance: regularly clean the compressor and condenser. Regularly clean your refrigerator at least every two months.

First cut off the power supply, gently scrub with neutral detergent and water, and then wipe it off with clean water.

5. Do not use washing powder, detergent, talcum powder, alkaline cleaner, Tina water, boiling water, oil, brush, etc. to clean the case. When the refrigerator will not be used for a long time, please unplug the power plug, wipe the refrigerator clean, and then close the cabinet door after the cabinet is completely dry.